Menu
Emulink CP is an adhesion promoter suitable for both water-based and solvent-based coatings. Coating adhesion to most metal substrates and inorganic substrates is enhanced through chemical bonding with the metal or inorganic surface. Increased coating adhesion results in improvements in corrosion, humidity, chemical and water resistance. Emulink CP is compatible with most resins including alkyd, epoxy, PUD, acrylate, and polyester.
Emulink CP may also be used for mineral slurry grinding, which enables more fillers to be incorporated into rubber compounds through the coupling of the mineral surface with the rubber polymer chain.
EPWET 1940 is a wetting and dispersing additive for aqueous pigments and organic slurries. It is suitable for carbon black, organic pigment and stearate dispersions.
EPWET 1940 is a wetting and dispersing additive for aqueous pigment dispersing and organic slurry dispersing. It is suitable for carbon black, organic pigment and stearate dispersions.
The additive deagglomerates pigment particles through surface wetting and steric stabilization. Highly concentrated pigment dispersions with good dispersion stability can be achieved to provide excellent color strength and very low viscosity.
The additive wets and stabilizes stearate dispersions through steric stabilization. Stearates such as zinc stearate, magnesium stearate, calcium stearate and potassium stearate may be produced with excellent stability with EPWET 1940.
The additive stabilizes salt coagulant by steric stabilization. Coagulant of Ca(NO3)2 with stearate anti-tack dispersion may be stabilized with small amount of the additive.
EPWET 2145 is a wetting and dispersing additive suitable for all types of solvent-based pigment dispersions.
The additive deagglomerates pigment particles through surface wetting and electrosteric stabilization. Highly concentrated pigment dispersions with good dispersion stability can be achieved to provide excellent color strength and very low viscosity.
EmulMatt M10 is an aqueous dispersion of micronized crosslinked polymer for aqueous coating and printing inks for matting. It can be easily incorporated into the formulation either at the grinding or let down stage. Unlike silica-based matting agents, it does not cause an increase in formulation viscosity or sedimentation. Formulations containing EmulMatt M10 perform exceptionally well in scratch resistance and adhesion to substrate as compared to inorganic matting agents.
Emulink SE is a scrub enhancement additive that significantly improves scrub and wear resistance,
corrosion resistance and physical strength of the coating. It is suitable for use in acrylate emulsions,
emulsion paints, PUD formulations and rubber latex formulations.
Emulsofier FRI is a flash rust inhibitor typically used in metal surface protection, waterborne metal
coatings and other water-based formulations.
EPWET 2030 is a wetting and dispersing additive for aqueous printing inks. It is used in resin grind
carbon black and organic pigment dispersions for viscosity and stability control.
To request for Technical Data Sheet or Safety Data Sheet, please contact us.
EPWET 1940 is a wetting and dispersing additive for aqueous pigment dispersing and organic slurry dispersing. It is suitable for carbon black, organic pigment and stearate dispersions.
EPWET 1940 is a wetting and dispersing additive for aqueous pigment dispersing and organic slurry dispersing. It is suitable for carbon black, organic pigment and stearate dispersions.
EPWET 2145 is a wetting and dispersing additive suitable for all types of solvent-based pigment dispersions.
The additive deagglomerates pigment particles through surface wetting and electrosteric stabilization. Highly concentrated pigment dispersions with good dispersion stability can be achieved to provide excellent color strength and very low viscosity.
Emulink CP is an adhesion promoter suitable for both water-based and solvent-based coatings. Coating adhesion to most metal substrates and inorganic substrates is enhanced through chemical bonding with the metal or inorganic surface. Increased coating adhesion results in improvements in corrosion, humidity, chemical and water resistance. Emulink CP is compatible with most resins including alkyd, epoxy, PUD, acrylate, and polyester.
Emulink CP may also be used for mineral slurry grinding, which enables more fillers to be incorporated into rubber compounds through the coupling of the mineral surface with the rubber polymer chain.
EmulMatt M10 is an aqueous dispersion of micronized crosslinked polymer for aqueous coating and printing inks for matting. It can be easily incorporated into the formulation either at the grinding or let downstage. Unlike silica-based matting agents, it does not cause an increase in formulation viscosity or sedimentation. Formulations containing EmulMatt M10 perform exceptionally well in scratch resistance and adhesion to substrate as compared to inorganic matting agents.
